Removal and Installation
CAUTION:
When replacing chassis control module, configuration of chassis control module is required. Refer to Description .
REMOVAL
- Remove the glove box assembly. Refer to Removal and Installation .
- Disconnect the harness connector from the chassis control module.
- Release pawl and remove the chassis control module.CAUTION:
Never drop the chassis control module.
INSTALLATION
CAUTION:
- When replacing chassis control module, configuration of chassis control module is required. Refer to Description .
- Never drop the chassis control module.
- After replace the chassis control module, depress brake pedal and check that the stop lamp turns ON.
Installation is in the reverse order of removal.