July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Symptom Table

Check "Data Monitor" mode of "BCM(COMB SW)" using CONSULT for any malfunctioning item.

Check the malfunction combinations. Malfunction item: x

Malfunction combination	Data monitor item
Malfunction combination	FR WIPER HI	FR WIPER LOW	FR WASHER SW	FR WIPER INT	INT VOLUME	RR WIPER ON	RR WIPER INT	RR WASHER SW	TURN SIGNAL R	TURN SIGNAL L	TAIL LAMP SW	HI BEAM SW	HEAD LAMP SW	LIGHT OFF SW	PASSING SW	AUTO LIGHT SW	FR FOG SW
A												x			x		x
B					x						x		x			x
C			x					x	x	x
D	x	x		x										x
E					x	x	x
F
G		x	x		x
H	x				x			x				x
I				x			x						x		x
J						x				x						x
K									x		x			x			x
L	All Items
M	If only one item is detected or the item is not applicable to the combinations A to K

Identify the malfunctioning part from the agreed combination and repair or replace the part.

Malfunction combination	Malfunctioning part	Repair or replace
A	Combination and master light switch INPUT 1 circuit	Inspect the combination and master light switch input circuit applicable to the malfunctioning part. Refer to Diagnosis Procedure .
B	Combination and master light switch INPUT 2 circuit
C	Combination switch INPUT 3 circuit
D	Combination and master light switch INPUT 4 circuit
E	Combination switch INPUT 5 circuit
F	Combination switch INPUT 6 circuit
G	Combination switch OUTPUT 1 circuit	Inspect the combination and master light switch output circuit applicable to the malfunctioning part. Refer to Diagnosis Procedure .
H	Combination switch OUTPUT 2 circuit
I	Combination and master light switch OUTPUT 3 circuit
J	Combination and master light switch OUTPUT 4 circuit
K	Combination and master light switch OUTPUT 5 circuit
L	BCM	Replace BCM. Refer to Removal and Installation .
M	Combination switch	Replace the combination switch. Refer to Removal and Installation .