DTC Description

DTC DETECTION LOGIC

DTC No.	CONSULT screen terms(Trouble diagnosis content)	DTC detected condition
C13DE-00	TEMPERATURE SENSOR(Temperature sensor)	1	Diagnosis condition	When engine running.
			Signal (terminal)	-
			Threshold	Control module detects that the internal temperature in steering angle main control module is Temperature <-40°F (-40°C).
			Diagnosis delay time	1 second or more
		2	Diagnosis condition	When engine running.
			Signal (terminal)	-
			Threshold	Control module detects that the internal temperature in steering angle main control module is 302°F (150°C) < Temperature.
			Diagnosis delay time	1 second or more

POSSIBLE CAUSE

Steering angle main control module

FAIL-SAFE

Protection mode

NOTE:

For details of protection functions, refer to Protection Function .

DTC CONFIRMATION PROCEDURE

PRECONDITIONING
1. If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.
>>

GO TO 2.
DTC REPRODUCTION PROCEDURE
1. CONSULT
  1. Start the engine.
    CAUTION:
    Never drive the vehicle.
  2. Turn the steering wheel.
  3. Select "Self Diagnostic Result" mode of "DAST 1".
Is DTC "C13DE-00" detected?

YES>>

Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO>>

Confirmation after repair: Inspection End.