DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms(Trouble diagnosis content) | DTC detected condition | |
|---|---|---|---|
| C13D8-00 | CONTROL MODULE(Control module) | Diagnosis condition | When engine running |
| Signal (terminal) | - | ||
| Threshold | The malfunction in each motor angle sensor is detected. | ||
| Diagnosis delay time | 1 seconds or more | ||
POSSIBLE CAUSE
- Force motor angle sensor
- Sensor circuit (between steering force control module and force motor angle sensor) is open or short.
- Steering force control module
FAIL-SAFE
-
DTC CONFIRMATION PROCEDURE
- DTC REPRODUCTION PROCEDURE
CONSULT
- Ignition switch OFF and wait for at least 10 seconds.
- Start the engine.CAUTION:
Never drive the vehicle.
- Select "Self Diagnostic Result" mode of "EPS/DAST 3".
Is DTC "C13D8-00" detected?
YES>>
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .
NO>>
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO>>
Confirmation after repair: Inspection End