DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms(Trouble diagnosis content) | DTC detected condition | |
|---|---|---|---|
| C13E2-00 | FRONT WHEEL SENSOR SIGNAL(Front wheel sensor signal) | Diagnosis condition | When ignition switch ON |
| Signal (terminal) | - | ||
| Threshold | Malfunction value of front wheel sensor (both side) is detected. | ||
| Diagnosis delay time | 2 seconds or more | ||
POSSIBLE CAUSE
- Using the 2 wheel chassis dynamometer
- Continuing the slip condition for long time
- Front wheel sensor
FAIL-SAFE
-
DTC CONFIRMATION PROCEDURE
- PRECONDITIONING
- If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.
>>
GO TO 2.
- DTC REPRODUCTION PROCEDURE
CONSULT
- Ignition switch ON.
- Turn the steering wheel.
- Select "Self Diagnostic Result" mode of "EPS/DAST 3".
Is DTC "C13E2-00" detected?
YES>>
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .
NO>>
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO>>
Confirmation after repair: Inspection End.