October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Work Procedure

PERFORM ECM RECOMMUNICATING FUNCTION
1. 1. Install ECM.
  2. Contact backside of registered Intelligent Key* to push-button ignition switch, then ignition switch ON.*: To perform this step, use the key that is used before performing ECM replacement.
  3. Maintain ignition switch in the ON position for at least 5 seconds.
  4. Ignition switch OFF.
  5. Check that the engine starts.
>>

GO TO 2.
PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM
1. Refer to Work Procedure .
>>

Inspection End.