LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2024 >> QX60 Autograph, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Removal And Installation >> EVAP Control System Pressure Sensor >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

REMOVAL 

  1. Remove the floor under cover (LH). Refer to Removal and Installation .
  2. Disconnect the harness connector from EVAP canister control pressure sensor.
  3. Remove EVAP canister control pressure sensor and O-ring.

INSTALLATION 

Installation is in the reverse order of removal.

CAUTION:

Do not reuse O-ring when installing new EVAP canister control pressure sensor. The EVAP canister control pressure sensor and O-ring are serviced as an assembly.

scientia non olet · About LEMON Manuals