Work Procedure

1. Replace BCM. Refer to Removal and Installation .

YES>>

GO TO 2.

1. Perform configuration (BCM). Refer to Description .

YES>>

GO TO 3.

CAUTION:

Before pairing the BCM and Intelligent Key unit, always write BCM configuration. Or not doing so, BCM control functions will not operate normally.

1. Perform pairing the BCM and Intelligent Key unit. Press UNLOCK button of Intelligent Key.

YES>>

GO TO 4.

1. CONSULT
   1. Select "VIN REGISTRATION" in "Work Support" mode of "BCM (BCM) ".
   2. Refer to CONSULT and follow the on-screen instructions.

YES>>

GO TO 5

CAUTION:

When replacing BCM in relation with ECM replacement, replace ECM before writing MAC key. Refer to Description .

1. Perform MAC key writing. Refer to Description .

YES>>

GO TO 6.

1. Perform the initialization and registration of tire pressure sensor ID. Refer to Description .

YES>>

Work End.