Configuration (BCM): Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing the BCM. The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the BCM. Refer to Work Procedure .

NOTE:

• When replacing the BCM, always replace it with a new one.
• To prevent damage to the BCM, perform module configuration before paring the BCM and Intelligent Key unit.
• Module configuration must be performed before pairing the BCM and Intelligent Key unit. Once the BCM and Intelligent Key unit have been paired, portions of the configuration are locked and can no longer be changed.
• When replacing the BCM, it is critical to follow the work procedures as detailed in the ESM.
• For details about the network connection and operation, refer to "CONSULT Operation Manual".
• For configuration there is no need to "save" configuration data from the BCM. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.