Work Procedure

1. 1. Close the door.
   2. Ignition switch ON.
   3. Continue pulling the power window switch UP until glass stops at fully closed position then release the switch. 1
   4. Keep pulling the switch for 5 seconds or more. 2
   5. Continue pressing the power window switch DOWN until glass stops then release the switch.
   6. Keep pressing the switch for 5 seconds or more. 2

      After glass moves again, keep pressing the switch until glass reaches the fully open position.

   7. Continue pulling the power window switch UP (MANUAL-UP operation) until glass stops at fully closed position.
   8. Check that AUTO-UP function operates normally.
   NOTE: 1: If the power window stops before reaching the fully closed position: After the power window stops, release the switch then continue pulling the switch UP again and move the power window to the fully closed position.

   2: After keep pulling or pressing 5 seconds or more, glass moves again.

>>

GO TO 2.

1. Check anti-pinch function. Refer to Description .

>>

Inspection End.