LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2024 >> QX60 Pure, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (1 Of 2) >> System Description >> System >> Fuel Pump Control Module (FPCM) >> System Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Description

SYSTEM DIAGRAM 

GNSDB137835Courtesy of NISSAN NORTH AMERICA, INC.
Component parts Function
Crankshaft position sensor 1 Crankshaft Position Sensor 1 
Exhaust camshaft position sensor Exhaust Camshaft Position Sensor 
Engine coolant temperature sensor Engine Coolant Temperature Sensor 
Mass air flow sensor (With intake air temperature sensor) Mass Air Flow Sensor (With Intake Air Temperature Sensor) 
Battery ECM receives the battery voltage signal.
ECM ECM (With Barometric Pressure Sensor) 
FPCM Fuel Pump Control Module 
Low pressure fuel pump Low Pressure Fuel Pump 

SYSTEM DESCRIPTION 

The fuel pump control module (FPCM) controls the discharging volume of the fuel pump by the FPCM control signals (Low/Mid/High) depending on driving conditions.

Conditions Amount of fuel flow Supplied voltage (Approx.)
For 1 second after turning ignition switch ON Low/Mid 12.9 V
  • Engine cranking
  • Engine coolant temperature is below 10°C (50°F)
  • Engine is running under high load and high speed conditions
High 10.7 - 12.9 V
Except the above Low/Mid 8.1 - 12.9 V