Component Inspection

1. Turn ignition switch OFF.
2. Disconnect combination switch (spiral cable) harness connector M302 (For Mexico) or M600 (Except for Mexico).
3. Check resistance between combination switch harness connector terminals under the following conditions.
   For Mexico
   
   

   Combination switch		Condition	Resistance (Ω)
   Connector	Terminals
   M302	13 and 16	MAIN switch: Pressed	Approx. 0
   		CANCEL switch: Pressed	Approx. 250
   		SET- switch: Pressed	Approx. 660
   		RES+ switch: Pressed	Approx. 1, 480
   		All ASCD steering switches: Released	Approx. 4, 000

   Except for Mexico
   
   

   Combination switch		Condition	Resistance (Ω)
   Connector	Terminals
   M600	16 and 17	MAIN switch: Pressed	Approx. 0
   		CANCEL switch: Pressed	Approx. 250
   		SET- switch: Pressed	Approx. 660
   		RES+ switch: Pressed	Approx. 1, 480
   		All ASCD steering switches: Released	Approx. 4, 000

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace ASCD steering switch. Refer to STEERING WHEEL : Exploded View .