Component Inspection

1. Check the voltage between FPCM terminals under the following conditions.

   FPCM		Condition	Voltage
   +	-
   Terminal	Terminal
   1	2	For 1 second after turning ignition switch ON	Approx. 8.5 V
   		More than 1 second after turning ignition switch ON	Approx. 0 V
   		Idle speed	Approx. 8.5 V

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace FPCM. Refer to FUEL PUMP CONTROL MODULE (FPCM) : Removal and Installation .