Confirmation Procedure

1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.

>>

GO TO 2.

1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Select "DATA MONITOR" mode With CONSULT:
4. Check that "COOLAN TEMP/S".
   • If it is between 5°C (41°F) and 40°C (104°F) go to the following steps.
   • If it is below 5°C (41°F) warm engine up to more than 5°C (41°F) and retry from step 1.
   • If it is above 40°C (104°F) cool engine down to less than 40°C (104°F) and retry from step 1.
5. Start engine and let it idle for 5 minutes.
6. Check 1st trip DTC.

With GST:

Follow the procedure "With CONSULT: " above.

Is 1st trip DTC detected?

YES>>

Refer to DTC Diagnosis Procedure .

NO>>

INSPECTION END