Confirmation Procedure

1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds.

TESTING CONDITION:

Before performing the following procedure, confirm that battery voltage is 8 V or more at idle.

Which DTC is detected?

P2100>>

GO TO 2.

P2103>>

GO TO 3.

1. Turn ignition switch ON and wait at least 2 seconds.
2. Start engine and let it idle for 5 seconds.
3. Check DTC.

Is DTC detected?

YES>>

Refer to DTC Diagnosis Procedure .

NO>>

INSPECTION END

1. Turn ignition switch ON and wait at least 1 second.
2. Check DTC.

Is DTC detected?

YES>>

Refer to DTC Diagnosis Procedure .

NO>>

INSPECTION END