LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1984 >> Impulse Standard >> Repair and Diagnosis >> Engine Performance >> System >> I-TEC Control System >> Testing >> Test 5 - Starter Signal (Code 22)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Test 5 - Starter Signal (Code 22)

Disconnect MCU control terminals at MCU. Connect voltmeter positive lead to terminal 25 and negative lead to ground. Check for starter signal when ignition switch is turned to start position. If no signal, check circuits to ignition switch and MCU.

scientia non olet · About LEMON Manuals