LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1992 >> Stylus RS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Fuel System >> Fuel Pressure & Fuel Pump Relay Test >> Fuel Pressure Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Pressure Test

  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE under FUEL SYSTEM. Attach Fuel Pressure Gauge Set (J-34730-1) and Adapter (J-35957-1) to outlet side of fuel filter. Disconnect pressure regulator vacuum hose. Turn ignition on. Allow fuel pump to run for about 10 seconds.
  2. Fuel system pressure should be about 35-38 psi (2.5-2.7 kg/cm2 ). Start engine and check for leaks. Connect pressure regulator vacuum hose. If engine will not start, fuel pump relay can be by-passed. Also see appropriate CHART A-3, ENGINE CRANKS BUT WILL NOT RUN under DIAGNOSTIC CHARTS. With engine idling, fuel pressure should be 25-30 psi (1.8-2.1 kg/cm2 ).
NOTE: To test fuel pump relay circuit, proceed to appropriate CHART A-5, FUEL PUMP RELAY CIRCUIT under DIAGNOSTIC CHARTS.
scientia non olet · About LEMON Manuals