October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Window Switch Continuity (Driver's Side Switch)
- Remove switch from door trim panel. Disconnect power window switch harness connector. Using an ohmmeter, check continuity between specified switch terminals with power window switch in specified position. See DRIVER'S POWER WINDOW SWITCH CONTINUITY CHART
.
- Continuity is checked between 2-terminal connector and 10-terminal connector. For switch terminal identification, seeFigure
and Figure
.
If continuity is not as specified, replace appropriate switch.
DRIVER'S POWER WINDOW SWITCH CONTINUITY CHART
| Sw. Application & Position |
Check Continuity Btwn.
Term's. No. |
| Left Front |
| DOWN |
1 & 6; 2 & 5 |
| OFF |
2 & 5; 2 & 6 |
| UP |
1 & 5; 2 & 6 |
| Right Front |
| DOWN |
1 & 2; 2 & 1 |
| OFF |
2 & 1; 2 & 2 |
| UP |
1 & 1; 2 & 2 |
| Left Rear |
| DOWN |
1 & 3; 2 & 4 |
| OFF |
2 & 3; 2 & 4 |
| UP |
1 & 4; 2 & 3 |
| Right Rear |
| DOWN |
1 & 9; 2 & 10 |
| OFF |
2 & 9; 2 & 10 |
| UP |
1 & 10; 2 & 9 |
| Lock |
| OFF (Unlock) |
1 & 7 |
| ON (Lock) |
N/A |