LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1994 >> Rodeo S, 2.6 E >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks - Power >> Component Testing >> Control Unit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Control Unit

  1. Disconnect control unit connector. Apply battery voltage to control unit terminal No. 6 and ground terminal No. 3. SeeFigure . Using an ohmmeter, check continuity between terminals No. 3 and 4, and terminals No. 3 and 5. Continuity should exist.
  2. Ground terminal No. 2. Current should be present at terminal No. 5 for about one second. Disconnect ground from terminal No. 2 and ground terminal No. 1. Current should be present at terminal No. 4 for about one second. If control unit does not test as described, replace control unit.
scientia non olet · About LEMON Manuals