LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1996 >> Hombre L4-2.2L CPC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Crankshaft Position Sensor: Service and Repair

Figure 6B-1 - Sensor to Crankshaft Reluctor Relationship, Ignition Coil Assembly,:




REMOVE OR DISCONNECT
1. Raise the vehicle and suitably support.
2. CKP sensor harness connector at module
3. CKP sensor mounting bolts
4. CKP sensor from engine
Inspect the CKP sensor 0-ring for wear, cracks or leakage. Replace if necessary. Lube new 0-ring with engine oil before installing.

INSTALL OR CONNECT
1. CKP sensor into block
2. CKP sensor mounting bolts
3. Tighten CKP sensor mounting bolt to 8 Nm (71 in. lbs.)
4. CKP sensor harness connector.
5. Lower the vehicle.
scientia non olet · About LEMON Manuals