LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1996 >> Hombre L4-2.2L CPC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Service and Repair

Knock Sensor (KS) Location:




REMOVE
1. Negative battery cable from the battery.
2. Raise the vehicle and suitably support.
3. Knock Sensor (KS) wiring harness connector from the KS.
4. Knock sensor from the engine block.

INSTALL
1. Knock sensor into the engine block. Clean the threads thoroughly.

Tighten The knock sensor to 16-22 Nm (12-16 ft. lbs.).

2. KS wiring harness connector to the knock sensor.
3. Lower the vehicle.
4. Negative battery cable to the battery.

scientia non olet · About LEMON Manuals