Control Panel Assembly and/or Control Cables

Control Assembly and Blower Switch

Remove or Disconnect
1. Accessory trim plate.
2. Control assembly screws.
3. Control assembly.
4. Vacuum connectors, as necessary.
5. Electrical connectors, as necessary.










Install or Connect
1. Electrical connectors, as necessary.
2. Vacuum connectors, as necessary.
3. Control assembly.
4. Control assembly screws.

Tighten
- Screws to 1.9 N.m (17 lb in).

5. Accessory trim plate.
- Perform "Heater Function Test."