LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1998 >> Oasis LS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Theory and Operation >> Engine Controls - Theory & Operation >> Computerized Engine Controls >> Input Devices >> Oxygen Sensor (O2S)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oxygen Sensor (O2S)

Oxygen sensor detects oxygen content of exhaust gases and sends signal to PCM, which varies air/fuel ratio to maintain a 14.7:1 ratio under most conditions. This ratio is most efficient for combustion and 3-Way Catalytic Converter (TWC) operation. O2S has an internal heater to stabilize sensor output. Each vehicle has at least 2 Heated Oxygen Sensors (HO2S). There is a primary HO2S-1 mounted in front of TWC and a secondary HO2S-2 behind TWC. On Accord with California emissions, HO2S-2 is located between the 2 substrate sections of catalytic converter.

scientia non olet · About LEMON Manuals