Variable Intake Manifold Solenoid Test

Variable Intake Manifold Solenoid Test
This test is conducted check VIM Solenoid for proper operation.

Tech 2 must be used for this test.

Test Procedure:
1. Connect Tech 2 to the vehicle DLC.




2. Ignition SW is "On".




3. Select F3: Miscellaneous Test in the Application Menu.




4. Select F6: Variable Intake Manifold Solenoid Test.




5. Push "On" or "Off" of soft key.
6. Control VIM Solenoid check data list.
- If data list changes, the VIM Solenoid is normal.