Sensor Signal Abnormality Criteria (Using Tech 2)
- While driving, the speed of one or two wheels is 25% or more higher or lower than that of the other wheels.
- The speed of one or two wheels is 10 km/h (6 mph) or more higher or lower than that of the other wheels.
- During steady driving, wheel speed changes abruptly.
*1 The vehicle must run on a level paved road.
NOTE:
Even after repairing the faulty part the warning light (W/L) does not go out if the vehicle is at a stop.
Turn the ignition switch to the ON position and drive the vehicle at 12 km/h (8 mph) or higher to make sure that the warning light goes out.
It is important to verify that the correct tires are installed on vehicle.