October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Coil: Installation
- Install the ignition coil assembly (3).
Connect ignition coil connector (1) and ignition coil (3), then tighten bolt (2) to the specified torque.
Torque:
4 N.m (35 lb in)
Courtesy of ISUZU MOTOR CO.
CAUTION:
Ignition coil assembly #6 is different from ignition coil assembly from #1 to #5. Ignition coil assembly #6 is short type. So, note it when installing ignition coil assembly of #6.
Courtesy of ISUZU MOTOR CO.
- Connect battery ground cable.