October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Selector Lever: Inspection: Installation
- Install selector lever subassembly.
- Connect harness connector.
- Connect shift lock cable.
- Connect select cable.
- Install selector lever knob and cover assembly.
- Install front console.
- Install rear console.
- Install center cluster assembly, cluster upper cover and knee pads.
- Connect negative (-) battery cable.
- After installation, make sure that the selector lever operates normally, and that each selector position is properly indicated. (The red mark shows through the window.)