October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal & Installation: Starter: Installation
- Install starter assembly (4).
- Install mounting bolts and tighten bolts (3). See TORQUE SPECIFICATIONS .
- Reconnect the connectors to terminals "50" (2) and tighten terminals "30" (1). See Fig 1.
- Install exhaust front left pipe (2) and tighten bolts and nuts. See TORQUE SPECIFICATIONS .
- Connect two heated O2 Sensor connector (1). See Figure.
- Reconnect the battery ground cable.
Courtesy of ISUZU MOTOR CO.