Power Steering Unit: Disassembly
WARNING: This page is about a different car, the 2002 Isuzu Rodeo Sport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The valve housing is made of aluminum and care should be exercised when clamping in a vise, etc. to prevent distortion or damage.
- Loosen lock nut and remove tie-rod end.
- Remove clip (3) and band (5), then remove bellows (4).
- Remove tie-rod assembly. To remove, move the boot toward the tie-rod end, then remove tab washer.
- Remove oil line, mounting rubber and dust cover.