Section 5 (Generators & Regulators): Overhaul: Generator: Reassembly

WARNING: This page is about a different car, the 2002 Isuzu Trooper and 2001 Isuzu Trooper. However, it is still accessible from the selected car via links, so may be relevant.

To reassemble, apply the disassembly in the reverse order, noting the followings:

Using a press with a socket wrench attached, reassemble rotor and rear end cover assembly in the front cover. See Fig 1 .
Install the pulley on the rotor. Secure the pulley directly in the vise between two copper plates, and tighten the nut to torque specifications. See TORQUE SPECIFICATIONS . See Fig 2 .

Fig 1: Reassembling Rotor

Courtesy of ISUZU MOTOR CO.

Fig 2: Installing Pulley On The Rotor

Courtesy of ISUZU MOTOR CO.