Test Description

Number(s) below refer to the step number(s) of the diagnostic procedures:

1. 2
   
   Visually/physically inspect for the following throttle valve conditions.
2. 3
   
   Visually/physically inspect for the following accelerator pedal conditions.
3. 5
   
   Check the following circuits for throttle valve and DC motor. Check the following TP sensor resistance and DC motor.
4. 6
   
   Check the following circuits for acceleration pedal. Check the following AP sensor resistance.
5. 7
   
   Following DTC: Error for ETC system.
6. 10
   
   Following DTC: Software detect Error for ETC system.
7. 11
   
   Following DTC: Software detect Error for ETC system.