July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Toe-in Adjustment

To adjust the toe-in angle, loosen the lock nuts (2) on the tie rod (1) and turn the tie rod.
Turn both rods the same amount, to keep the steering wheel centered.

Toe-in: 0 to +2 mm (0 to +0.08 in)

Fig 1: Adjusting Toe-In
Courtesy of ISUZU MOTOR CO.
Tighten the lock nut to the specified torque.
1. Torque: 98 N.m (72 lb ft)