Charge Indicator Inoperative
- Did you perform the Diagnostic System Check? If yes, go to next step. If no, see DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM.
- Turn ON the ignition, with the engine OFF observe the charge indicator on the instrument cluster. Is the charge indicator illuminated? If yes, possible poor connection. Perform DIAGNOSTIC SYSTEM TEST. If no, go to next step.
- Replace the IPC. See appropriate IPC REPLACEMENT in INSTRUMENT PANEL article in ACCESSORIES & EQUIPMENT. Did you complete the replacement? If yes, go to next step.
- Operate the system in order to verify the repair. Did you correct the condition? If yes, system is OK? If no, go to step 2 .