LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Axiom Base, RWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Camshaft Position Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Camshaft Position Sensor: Removal

  1. Disconnect battery ground cable
  2. Wiring connector from camshaft position sensor.
  3. Remove camshaft position sensor from cylinder head.
    Fig 1: Removing Camshaft Position Sensor From Cylinder Head
    G02787954Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals