System Specifications

The contents of this article reflect SB06_07_S001_MU.
Manual Update Dated 11/1/2006

Differential Fluid Capacity

Capacity Front

When the differential is cold, add enough fluid to raise the level to 1/2 inch (12 mm) below the filler plug hole.

When the differential is at operating temperature (warm) add enough lubricant to raise the level to the bottom of the filler plug hole.



Capacity Rear

The proper level is from 0 to 3/8 (0 to 10 mm) below the bottom of the filler plug hole, located on the rear axle.