October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the following components from the lower air cleaner housing/washer solvent tank assembly (4). Refer to Air Cleaner Element Replacement .
- The air cleaner cover (2)
- The filter element (6)
- The mass air flow (MAF) /intake air temperature (IAT) sensor (3)
- The air inlet duct (5)
Courtesy of GENERAL MOTORS CORP.
- Disconnect the following electrical connectors:
- The windshield washer pump (1)
- The headlamp washer pump (2), if equipped
- The low solvent level sensor (4)
- The lift gate washer pump (6), if equipped
- Remove the wire harness to the washer solvent level sensor from the retaining clips (3,5).
Courtesy of GENERAL MOTORS CORP.
- If applicable, disconnect the headlamp washer hose from the headlamp washer pump located on the lower air cleaner housing/washer solvent tank. Cap the headlamp washer pump outlet fitting to prevent loss of washer solvent.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the washer pump hoses (3) and plug the outlet ports to prevent loss of washer solvent.
- Remove the 2 retaining nuts (1) from the mounting studs on the air cleaner housing/washer solvent tank assembly.
- Lift the lower air filter housing/washer solvent tank assembly (2) off of the studs and remove the assembly.