LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2005 >> Ascender Limited, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Knock Sensor (KS) Replacement (Left Side) >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Knock Sensor, Engine Harness & Engine Block - Left Side
    GM1480894Courtesy of GENERAL MOTORS CORP.
  1. Remove the mounting bolt for the knock sensor 1.
  2. Disconnect the electrical connector of the knock sensor from the engine harness (3).
  3. Remove the knock sensor (2) from the engine block (4).
scientia non olet · About LEMON Manuals