LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2006 >> Ascender Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Exhaust System) >> Repair Instructions >> Exhaust System Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Exhaust Hangers
    GM753688Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust system to the vehicle and secure with the exhaust system hanger insulators.
    2. Fig 2: View Of Exhaust Pipe To Muffler Joint
    GM753687Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the muffler to the catalytic converter and secure with the nuts.

    Tighten:  Tighten the nuts to 45 N.m (33 lb ft).

  3. Inspect the exhaust system for leaks and underbody contact.
  4. Install the rear axle brace. Refer to Rear Axle Brace Replacement in Rear Suspension.
  5. Install the rear axle tie rod. Refer to Rear Axle Tie Rod Replacement in Rear Suspension.
  6. Install the spare tire assembly.
  7. Install the frame brace. Refer to Frame Brace Replacement (TrailBlazer EXT, Envoy XL) or Frame Brace Replacement (TrailBlazer, Envoy, Bravada) in Frame and Underbody.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals