LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2006 >> i-280 L4-2.8L >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor HVAC >> Compressor Clutch Hub >> Service and Repair
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Compressor Clutch Hub: Service and Repair

COMPRESSOR CLUTCH PLATE/HUB ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the compressor.




2. Remove the clutch plate retaining bolt (1).
3. Remove the clutch plate assembly (2).
4. Remove the clutch hub/bearing snap ring (3).
5. Remove the clutch hub/bearing assembly (4).

INSTALLATION PROCEDURE




1. Install the clutch hub/bearing assembly (4).
2. Install the clutch hub/bearing snap ring (3).
3. Install the clutch plate assembly (2).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the clutch plate retaining bolt (1).

Tighten
Tighten the bolt to 18 N.m (13 lb ft).

5. Install the compressor.
scientia non olet · About LEMON Manuals