Removal Procedure
WARNING: This page is about a different car, the 2009 GMC Envoy and 2009 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
- Remove the electrical connector (1) from the receiver.
- Remove the antenna electrical connector (1) from the receiver.
- Remove the nuts retaining the receiver to the insulator panel.
- Remove the receiver from the vehicle.
NOTE:
Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock®, and "XM Theftlock®" will display.