LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Power Steering Pump Bracket & Mounting Bolts
    GM1201382Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering pump bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the power steering pump bracket mounting bolts.

    Tighten:  Tighten the power steering pump mounting bolts to 50 N.m (37 lb ft).

  3. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  4. Install the power steering pump. Refer to Power Steering Pump Replacement (4.2L)  or Power Steering Pump Replacement (Except 4.2L) .
scientia non olet · About LEMON Manuals