All Models
Place wheels in straight-ahead position and measure toe-in. If not to specifications, adjust by loosening steering link lock nuts and rotating adjuster sleeves to obtain correct toe-in. Tighten lock nuts and recheck toe-in.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| XJ6 & XJ12 | ||||||
| Front | 2 1/4 ± 1/4 | 1/1 ± 1/4 | 1/16 to 1/8 | ..... | ..... | |
| Rear | ..... | 3/4 ± 1/4 | ..... | ..... | ..... | |