System Controls
The climate control system is controlled by :
- Manual input from the operator, via the center console located control panel.
- Automatically by means of the A/CCM.
Output is based upon input from the following devices:
- Motorized In-car aspirator
- External air temperature sensor
- Coolant temperature sensor
- Heater 'air-off' (the temperature of the air leaving the matrix fins) temperature sensor
- Evaporator 'air-off' (the temperature of the air leaving the evaporator fins) temperature sensor
- Solar sensor
- Left hand blower recirculation / fresh air flap potentiometer
- Right hand blower recirculation / fresh air flap potentiometer
- Upper air distribution box (ADB) center and side face flap servomotor potentiometer
- ADB defrost flap servomotor potentiometer
- Air conditioning unit Foot flap servomotor potentiometer
- Air conditioning unit Cool Air Bypass flap servomotor potentiometer
- Center vent assembly temperature differential potentiometer
- Thumbwheel controls on the facia vent assemblies which provide manual adjustment of the airflow volume.
- Road and engine speed signals input to the A/CCM