Control Module HVAC: Service and Repair

Climate Control Module

Removal
1 Remove the cover and disconnect the battery ground cable. For additional information, refer to Specifications
2 Remove the instrument panel. For additional information, refer to Instrument Panel Instrument Panel




3 Remove the A/C control module.
- Remove the 4 Torx screws.
- Disconnect the electrical connector.

Installation
1 Install the A/C control module.
- Install the Torx screws.
- Connect the electrical connector.
2 Install the instrument panel. For additional information, refer to Instrument Panel Instrument Panel
3 Connect the battery ground cable and install the cover. For additional information, refer to Specifications
4 Connect WDS to the vehicle and configure a new module.