Inspection And Assembly Requirements

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 Jaguar XFR, 2012 Jaguar XF, 2011 Jaguar XFR, 2011 Jaguar XF, and 2010 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.

Check for leaks using ultraviolet (UV) Lamp. Refer to: Fluorescent Dye Leak Detection information.

NOTE: Any time a hose or component connection leak is observed, the component and fitting must be separated, cleaned and a new O-ring fitted and lubricated with air conditioning compressor oil. For additional information, refer to Specifications in this section.

NOTE: When separating A/C joints, cap the open connections immediately. Do not leave open to atmosphere.

O-ring seal surfaces must be free of dirt, lint, burrs and scratches. The O-ring and connector should be lubricated with air conditioning compressor oil. For additional information, refer to: Specifications information.