LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2013 >> XK Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Pedestrian Protection System -- XK/X150 >> Pedestrian Protection System >> Description And Operation >> Introduction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Description And Operation: Introduction

WARNING: All pyrotechnic devices are dangerous. Before performing any procedures on any pyrotechnic device, read all information contained within the Standard Workshop Practices section of this manual.

For additional information, refer to: Supplemental Restraint System (SRS) Health and Safety Precautions

The pedestrian protection system control module receives an impact signal from PCS (pedestrian contact sensor) and two accelerometers mounted on the front bumper beam. The control module interprets the signals to determine whether impact is with a pedestrian or other object, such as a traffic cone. When the control module detects a valid impact signal and the vehicle is in the 15 to 45 km/h (9 to 28 mph) speed range, it fires the two pyrotechnic hood latch release units and two pyrotechnic actuators which opens the hood approximately 130 mm (5.1 in.).

The pedestrian protection system is factory fit only to non Federal vehicles.