Pinpoint Tests: Notes
NOTE:
- If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval Program is in operation, prior to the installation of a new module/component.
- Navigation Diagnostic Screen Access
- With the vehicle at rest, place the ignition switch in either "ACC", "ON", or start the engine.
- On the "Menu" screen, press the top center of the screen for more than three seconds.
- Enter the PIN code, and then touch "OK". 660: Diagnosis Menu screen 661: System Check screen (DTC code verification screen) 662: GPS Information screen.
- The diagnostics screen will be displayed.
NOTE:
- Move the vehicle to an open area, radio waves from satellites may not be received inside buildings.
- Correct the vehicle cursor to the current location.