LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2017 >> F-Pace S >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control - F-Pace >> Speed Control >> Adaptive Speed Control Module >> Removal And Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Removal

NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Disconnect the startup battery ground cable.

    Refer to: Battery Disconnect And Connect

  2. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: Jacking and Lifting

  3. Remove the front bumper for access.

    Refer to: Front Bumper Removal and Installation

G11464936
  1. Disconnect the electrical connector.
  2. Remove the 3 bolts from the adaptive speed control module.

Torque Specification: 5 Nm 

scientia non olet · About LEMON Manuals