DTC U0455-56: Invalid Data Received From Restraints Occupant Classification System Module - Invalid/incomplete configuration: Action
NOTE:
- If a new occupant classification sensor service kit is installed the new module replacement and programing procedure must be performed
- Rectify all occupant classification system related DTCs before clearing DTCs
- After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs
- Using the Jaguar Land Rover approved diagnostic equipment, check and update the car configuration file as necessary. Clear the DTCs and retest
- Install the correct passenger seat type as necessary and follow the new module reprogramming procedure. Refer to workshop service information article 510-20B: Supplementary Restraint System - Diagnosis and Testing - Airbag and Safety Belt Pretensioner Supplemental Restraint System - Occupant Classification Sensor Control Module (OCSCM) New Module Replacement And Programing
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Learn Seat Occupant Classification Zero Position