DTC B13CB-46: Roof Blind Module - Calibration/parameter memory failure: Action
NOTE:
To validate the repair firstly run the engine for 30 seconds and check the roof blind function, then use the Jaguar Land Rover approved diagnostic equipment to check this Diagnostic Trouble Code(s) is no longer set within the body control module
- Using the approved Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s)
- Try to perform 3 full open/close cycles of the roof blind
- Using the Jaguar Land Rover approved diagnostic equipment, perform the routine - Calibrate Roof Blind (204C)
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest. If the fault persists, install a new front roof blind control module
- Using the approved Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s)